Membrane Dryers

Byproducts of compressed air such as water, oil, oil vapors, and humidity can cause severe damage to your business or operation. The Tsunami Membrane Dryer provide an economical solution for
supplying clean, dry air without the need for electricity. These dryers assure that your application is supplied with quality air to meet or exceed Class 4 ISO 8573-1: 2010 Compressed Air Contaminants and Purity Classes.

Incoming air enters the 1st stage water separator where water and particulates are removed down to 10 micron. The air then travels through the 2nd stage oil coalescing filter where oil mist and aerosols are captured down to .001 ppm and particulates are trapped down to .01 micron. Finally, pre-treated air then enters the Membrane Air Dryer where water vapor is removed from the air. This system can provide dew points down to -80ºF and relative humidity down to .01%RH. The air exits through the outlet regulator.

Features & Benefits

  • 100% duty cycle
  • No electricity required
  • Membrane element capacity 3X larger than competitor’s element
  • Low relative humidity – down to .01% RH
  • Low dew points – down to -80ºF
  • Easy, low maintenance – under $100/year average
  • Easy to read outlet regulator
Membrane Air Dryer by AIRID
Membrane Air Dryer
Model J-0357

Membrane Air Dryer Specifications

Max Ratings for Flow, Pressure, Temp.

FLOWPRESSURETEMP.PORT SIZEPART #
20 SCFM175 PSI100ºF1/4″J-0889
30 SCFM175 PSI100ºF1/2″J-0357

Learn more by reading the brochure