I-Beam Lubricators

Our Monorail I-Beam Conveyor Lubricator is usually located at the point of application, available in several sizes: 2 inch, 3 inch, 4 inch and 6 inch.

It consists of the DL-5003 controller, and all the outputs, i.e. 24vdc solenoid valves and sensors, dispensing tubes and bracketry. It lubricants x-chain pins & open trolleys on an I-beam overhead conveyor.

The DL-5003 can control up to 4 different lube cycles with multiple lube points within each cycle. The conveyor lubricator is connected to a 1/4" nylon lubricant supply tubing, which is connected to a 6, 12 or 65 gallon lubricant tank located on or next to a support column for easy of filling. The 6 gallon lubricant tank can also be installed on the rail next to the lubricator. The lubricator comes mounted on a 2-foot section of I-beam rail or can be field installed on existing rail.

FEATURES

  • Microprocessor controlled
  • Millisecond dispensing accuracy
  • Field programmable security code
  • Large 2-line LCD screen
  • 4 independent channels
  • Tracks lube usage per cycle
  • Displays approximate line speed
  • 16 button programmable key pad
  • Sturdy dispensing tubes resist vibration
  • Exclusive self-diagnostic feature available
  • PC interface contacts (optional PLC contacts)
  • Automatic fault shut-down
  • All electronic
  • 1 year warranty
  • 3 year microprocessor warranty

SPECIFICATIONS

POWER SOURCE120VAC OR 24VDC
DIMENSIONS19”L x 24”H x 12”W
LUBRICANT POINTSCHAIN PINS & OPEN TROLLEYS
OPTIONAL LUBE POINTS AVAILABLE

MODELS

2 INCHDL-211, DL-222
3 INCHDL-311, DL-322, DL-331, DL-332, DL-333
4 INCHDL-411, DL-422, DL-432, DL-433
6 INCHDL-611, DL-622, DL-632

Learn more by reading the brochures