Ultimate Luber Series
The Ultimate Luber™ is a powerful, motor-driven automatic lubrication which is refillable using standard grease guns. It’s microprocessor-controlled, energy-efficient motor delivers grease to a fixed-displacement pump that produces pressures over 1000psi. This strength allows the Ultimate Luber™ to drive lubricant through long feed lines and to cycle progressive distributors to feed several bearings consecutively. When a dispensing cycle is selected, the units will activate at programmed internals. At each interval, the Ultimate Luber™ dispenses approximately 1.25cc of grease. Neither temperature nor altitude will affect the lubricant output.
Specifications
- Most powerful automatic lubrication system on the market. Produces over 1000psi, which enables it to service single-point applications up to 30’ away (9m) and multi-point applications up to 20’ (6m) away.
- UL/CUL Div. 2 Hazardous Area approved.
- Single or Multi-point configuration.
- Refillable using a standard grease gun (no other tools needed).
- Able to service up to 12 lube points with optional progressive distribution block.
- Available with long-life replaceable battery packs or optional external power sources. (AC and DC)
- Optional Remote Control available to connect to customer machinery or control equipment. (e.g. PLC, Contractors, Relays)
- Suitable for indoor-outdoor use.
- Optional easy to install mounting brackets and mounting plates for either single-or multi-point applications are available.
- Multiple settings to empty from 15 days to 2 years.
- Operating range from -4ºF-131ºF (-20ºC to 55ºC) Note: Low-Temp lubricants may be used at low temperatures.
- The Ultimate has an internal blender to minimize grease separation and enhance lube consistency.
Size & Dimensions
| MODEL 125 | 4oz – 125cc | 7 1/2″ high x 3 1/8″ diameter |
| MODEL 250 | 8oz – 250cc | 7 1/2″ high x 4″ diameter |
| MODEL 500 | 17oz – 500cc | 8 3/4″ high x 4 3/4″ diameter |
