Automatic Grease Lubricators

Digilube Systems is proud to be a Distributor and Filling Station for ATS Electro-Lube which manufactures the industry’s best performing point of use automatic grease lubricators. The lube solutions are reliable, safe, and labor-saving alternatives to manual lubrication, for single or multiple lube points by using the progressive distribution blocks. The Lubers can provide up to two full years of continuous lubrication and can be mounted nearly anywhere, including remote setups as much as 30’ from the lubrication point. With the full line of self-contained automatic lubrication products, you’re sure to find the perfect lube solution for your application.

Luber Options

  • ELECTRO-LUBER™ – Original Nitrogen Gas Unit; Non-Refillable
  • ULTIMATE LUBER™ – Motor Driven Unit; Refillable with Grease Gun; Options: Battery or Electrical
  • TITAN LUBER™ SERIES
    • TITAN CL LUBER™ – Motor Driven Unit; 1 Refillable Standard Grease Cartridge; Options: Battery or Electric
    • TITAN II CL LUBER™- Similar as Titan CL Luber other than Width Size as it has 2 Refillable Standard Grease Cartridges; Options: Battery or Electric
    • TITAN OILER 2000™ – Motor Driven Unit; Refillable; Options – Battery or Electrical
  • JACK LUBER™ – Motor Driven Unit; Refillable with Replacement Cartridge

Accessories

AMounting Plates (Single-point & Multi-point)
BReplacement Battery Packs (Ultimate & Titan Series)
CAC Power Supplies (Ultimate & Titan Series)
DMounting Adapters and Reducers
EOil Brush
FMounting Brackets
GWeather Caps
HOil Check Valves
IHose & Fittings
JDistribution Block (4-12 Ports)

THE GREASE DISPENSERS WE OFFER:

ELETRO-LUBER SERIESULTIMATE SERIESTITAN SERIESJACK SERIES
APPLICATIONSingle-PointSingle or Multi-Point (Up to 12 points)Single or Multi-Point (Up to 12 points)Single or Multi-Point (Up to 12 points)
SIZESAvailable in 2, 4, 8 or 16 oz.
(60, 125, 250, 475cc)
Available in 4, 8, or 17 oz.
(125, 250, 500cc)
Requires 1 or 2 – 14 oz. Grease Cartridge.
Oiler has 47 oz. Capacity
Available in 4 oz. (125cc) & 8 oz.
(250cc) Capacity
TECHNOLOGYSafe, Inert Nitrogen Gas PoweredPowerful Mechanical Fixed-Displacement PumpPowerful Mechanical Fixed-Displacement Pump. Proven Ultimate Series TechnologyPowerful Mechanical Fixed-Displacement Pump. Jackscrew Mechanism Incorporated with Proven Ultimate Series Technology
DISPENSING
POWER
Up to 50 PSI. Can be remote mounted up to 3ft. Distribution blocks availableUp to 900 PSI. Can be remote mounted up to 30ft. Distribution blocks availableUp to 900 PSI. Single Point can be remote mounted up to 30ft. Distribution blocks availableOver 200 PSI. Single point can be remote mounted up to 30ft. Distribution blocks available
POWER SOURCEAA Alkaline BatteriesBattery pack or remote AC/DC power. Optional lithium battery packBattery pack or remote AC/DC power. Optional lithium battery packBattery Pack or remote AC/DC power
CYCLESingle use, DisposableRefillable with Standard Grease Gun or PumpRefillable with Standard Grease Cartridge(s). Oiler refillable through screened portReusable Motor Drive Unit and easily replaceable Single-Use Cartridge
LUBE CHOICECustomer Specified LubeCustomer Fill / RefillCustomer Fill / RefillCustomer Specified Lube
OPERATING SPAN15 days to 1 year on factory filled unitRefilled as needed. Variable from 15 days to 2 yearsCartridge replaced or oiler refilled as needed. Variable from 15 days to 2 yearsCartridge replaced as needed. Variable from 15 days to 2 years
LED INDICATORSPositive verification unit is workingTri-color LEDs to indicate normal operation, low battery, low tempTri-color LEDs indicate normal operation, low battery, low lube level, low temp. Oiler has low lube indicatorTri-color LEDs indicate normal operation, low battery
WEATHERPROOFWaterproof (submerged) to 30ft. Temp range: -40F to 131F (-40C to 55C Weathercap availableSuitable for outdoor use in temp range 5F to 132F (-15C to 55C) Weathercap includedSuitable for outdoor use in temp range 5ºF to 132ºF (-15ºC to 55ºC). Weathercap included for cannister and control unitSuitable for outdoor use in temp range -40ºF to 140ºF (-40ºC to 60ºC). Weathercap included
DISPENSING RATEEstablished flow-rates, simply select and installStandard timed intervals or custom programming availableStandard timed intervals or custom programming availableStandard timed intervals or custom programming available
APPROVALSUL & Cul approved Intrinsically safe for all areas; MSHA, Energy Mines Canada IECx BAS 11.0121x & 11.0120xClass I, Groups A, B, C, D, Div 2 Class II, Div 2, Groups F & G Class III Hazardous LocationsClass I, Groups A, B, C, D, Div 2. Class II, Div 2, Groups F & G. Class III hazardous locations.Class I, Groups A, B, C, D, Div 2. Class II, Div 2, Groups F & G. Class III hazardous locations.

Learn more by reading the brochures