Conveyor Lubricants
When productivity depends on steady, efficient conveyor movement, the right lubricant isn’t optional, it’s critical. Conveyor lubricants reduce friction and wear, protect metal surfaces from corrosion, and help keep your line moving without costly stoppages or premature component failures.
Digilube’s Conveyor Lubricants are engineered for industrial applications where uptime matters, whether operating in high-temperature ovens, food-safe lines, or anywhere in between.
OUR SOLUTIONS HELP:
Optimize Conveyor Performance
- Reduce friction between conveyor surfaces and loads
- Minimize line stoppages due to slippage or friction-related malfunctions
- Extend chain, rail, and bearing life with proper lubrication
Protect your Equipment
- Formulation options designed for heat resistance, corrosion prevention, and heavy loads
- Environmentally-friendly and food-grade options where required
- Consistent film strength that stands up to daily wear and harsh conditions
Save Time & Reduce Maintenance
- The right lubricant makes maintenance easier — protecting components so you can lengthen relubrication intervals, reduce costly manual touch-ups, and keep your maintenance crew focused on higher-value tasks.
OUR FEATURED LUBRICANTS
CleanLUBE
CleanLUBE is a Revolutionary Lubricant for all types of Conveyors. It is a premium, high-temperature, water-based lubricant that will provide unparalleled clean, cost-effective lubrication. Additionally, utilization of this one-of-a-kind lubricant can reduce lubricant consumption and does not have a flash point.
Ultra-Film Lubricant
Our line of Ultra-Film Lubricants consist of Ultra-Film 1, 2, AM and Food Grade (FG). Ultra-Film lubricates various types of conveyor systems, is moly free and has varying flash points; from ambient to 265°F. Furthermore, Ultra-Film FG Lubricant is approved by the NSF to be used in and around food processing environments.
THIN FILM LUBRICANTS
Digilube’s Thin Film Lubricants penetrate into the wear point of chain pins & trolley bearings to protect against wear, rust and corrosion from -65F up to 1200F. Additionally, these conveyor system lubricants can withstand loads of 300,000+ PSI.
Slide table to view all data
| Lubricant | Temperature Range | Viscosity | Pour Point | Flash Point | Color | Suspended Solids | Datasheet |
|---|---|---|---|---|---|---|---|
| CleanLUBE | up to 600°F | .66 CST @ 40°C | 23°F | None | Milky White | N/A | Data Sheet |
| Ultra-Film 1 | up to 600°F | 4 CST @ 40°C | 7ºF | 265°F | Amber | N/A | Data Sheet |
| Ultra-Film 2 | up to 600°F | 3 CST @ 40°C | -30°F | 147°F | Amber | N/A | Data Sheet |
| Ultra-Film AM | up to 300°F | 3 CST @ 40ºC | -30°F | 147°F | Amber | N/A | Data Sheet |
| LP750 | up to 700°F | 4 CST @ 40ºC | -21°F | 147°F | Dark Gray | MOS2 | Data Sheet |
| LP750HF | up to 700°F | 5 CST @ 40ºC | 7°F | 265°F | Dark Gray | MOS2 | Data Sheet |
| LP750HF – Spray | up to 700°F | 5 CST @ 40ºC | 7°F | 265°F | Dark Gray | MOS2 | Data Sheet |
SPECIALTY LUBRICANTS
Our specialty lubricants are water-soluble, synthetic, polyethylene glycol chain lubricants primarily used in automotive e-coat applications. Designed to perform across a wide operating range, they effectively lubricate various types of conveyor chains and bearings from -65°F up to 550°F.
Slide table to view all data
| Lubricant | Temperature Range | Viscosity | Pour Point | Flash Point | Color | Suspended Solids | Datasheet |
|---|---|---|---|---|---|---|---|
| HT100 | up to 475°F | 152 CST @ 40ºC | N/A | 570ºF | Amber | N/A | Data Sheet |
| HT220 | up to 500°F | 250 CST @ 40ºC | N/A | 595ºF | Amber | N/A | Data Sheet |
FOOD GRADE LUBRICANT
Our Safe, Ultra-Film FG (Food Grade) Lubricant is Approved by the NSF to be used in and around Food Processing Environments. This Conveyor Chain Lubricant is often utilized at Meat Processing Plants, as well as other Food Handling Facilities, using Bolted Chain or Logging Chain Conveyors with High Load-Carrying Capacity.
Slide table to all data
| Lubricant | Temperature Range | Viscosity | Pour Point | Flash Point | Color | Suspended Solids | Datasheet |
|---|---|---|---|---|---|---|---|
| Ultra-Film FG | up to 500°F | 7 CST @ 40ºC | -67°F | 145ºF | Colorless | N/A | Data Sheet |
LUBRICANT CROSS REFERENCE
Is your conveyor equipment not achieving its maximum performance potential? Consider Digilube’s Lubricants to ensure optimal performance and longevity of your conveyor equipment.
Click Digilube Lubricants below to quickly cross reference other lubricants on the market.
Series I
Series I / FE
Series I / M
Series O
Series I / M O
Series III / N
Series O
Series 301
Series ATS
Chain Lube 1000 NO
Chain Lube 1000
Chain Lube 3000HL – Mod.1G
Chain Lube 2000 HL – Mod. 1HF
Type ML
Type ML-L
Type MX
Series I / M-200
Chain Lube 1000 HFG
Chain Lube 1000 HF
Chain Lube 3000 HL-SYN
Tribol CH 290
Tribol CH 1421
Tribol CH 1430
Viscogen KL 3, 15, 23, 300
Viscogen KLK 25, KLK 28
Viscogen G
HTCL
Series 525
Series 735
Series KCL 46
Series SYS HT 200
Chain Lube 475
Premium NG 50
Our lubricants are specifically formulated to lubricate all overhead monorail conveyors exposed to washers and high-temperature ovens (excluding Ultra-Film AM). As a result, they provide superior protection against wear, rust, and corrosion at elevated temperatures while withstanding repeated loads exceeding 100,000 PSI.